Lib Tech

Lib Tech Trs Snowboard


€533.14 €603.25 (Save 12%)


Free Standard Delivery over €50

Return shipping refunded when you use PayPal

Choose size
  • 154cm 20SN033-NONE €533.14

    Despatched immediately

  • 157cm 20SN033-NONE €533.14

    Out of stock

  • 159cm 20SN033-NONE €533.14

    Out of stock

  • 162cm 20SN033-NONE €533.14

    Out of stock

Product Sizing Chart



Item code: 299031

New for this season, the TRS (Total ripper series) is a board that you don’t want to mess with. This board has proved itself in the pro scene across multiple disciplines but is designed to take your freestyle flair across the whole mountain. The profile on the TRS gives the board an aggressive edge to increase your control, power and precision when riding more technical terrain. Lib-Tech has a focus on environmentally friendly manufacturing which is visible in the horsepower construction processes, this construction uses renewable eco wood and eco-sublimated bio been top. A sintered base keeps you gliding faster for longer whilst Mage-traction edges increase your edge hold and control.

  • NEW! For the 2020/21 winter season
  • Snowboard type: All mountain/ freestyle
  • Snowboard ability: Intermediate to advanced
  • Shape: True twin. This nose and tail of this board are symmetrical, so you get the same performance riding forward and switch
  • Flex: Medium flex, rated 5 - 7/10. This flex level gives you a balance of response and forgiveness, ideal for all mountain riding and hitting the park
  • Profile: C³amber. This is an aggressive profile made with mild rocker in the centre with camber underfoot. Mild rocker increases your edge hold and helps the board to float over powder, whilst full camber adds pop, power and stability
  • HP construction:
  • Core: 60% aspen and 40% paulownia. Two strands of paulownia run the length of the board surrounded by aspen. This creates a lightweight yet durable core
  • Fiberglass: Tri-Ax/ Bi-Ax and Basalt. Bi-Ax fibreglass increases the strength of the core without effecting the flexibility, whilst Tri-Ax decreases torsional twist to create a more responsive board
  • Top sheet: Eco sublimated bio bean top
  • Base: Sintered knife cut base. This sintered base is extremely hardwearing for a longer lasting board. The pours retain wax well to keep you flying over flats for longer, so you don’t have to strap out and skate along
  • Sidewalls: Internal Birch sidewalls run along the length of the board along the toe and heel edge whilst UHMW sintered sidewalls run along the outside. These sidewalls increase the strength and response of the board. UHMW within the nose and tail deflect impact for a smoother ride
  • Magne-traction 7 serrations along the edge give you maximum edge hold on ice and hardpack snow. This edge gives you confidence going into sketchy terrain
  • Art by: Mike Parillo


Length (cm)Nose/Tail Width (cm)Waist Width (cm)Rider Weight (lbs)
15429.2/ 29.225.3120+
15929.4/ 29.425.3140+ 

The weight guide is low to indicate the minimum weight required 

Eco manufacturing: Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.

Snowboard Profile Hybrid
Snowboard Shape Twin
Snowboard Type All Mountain

Product Sizing Chart

Length (cm)

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy