Snowboard Type: All mountain freestyle snowboard which is suitable for park, resort and back country.
Rider Level: best suited to an intermediate to advanced rider.
Profile: C2 banana technology, this hybrid profile is made up of rocker inbetween your feet with camber either side. This gives you precision riding on the slopes and float in powder.
Shape: True twin shape. This is symetrical to create a balanced ride between the nose and tail, so you can ride switch and jib around.
Flexibility: Mediumto firm flex, rated 7/10.
Board Construction: HP construction. This construction gives you a smooth ride with a lightweight board.
Core: 60% Aspen and 40% paulmownia
Base: Eco sublimated sintered.
Fiberglass: Tri-Ax/ Bi-Ax glass with basalt. This gives the board stiffer sections to drive power and more flexible sections for torsional twist.
Topsheet: Bio beans top is eco friendly.
Sidewalls: Birch sidewalls internally run along the length of the toe and heel edge, outside of the birch runs UHMW sintered sidewalls. Whilst UHMW at the tip and tail increase impact deflection.
Edges: Magne-Traction edges are serrated to improve your edge hold, giving you better bite in icy conditions.
Nose/ Tail Width (cm)
Waist Width (cm)
Rider weight (kg)
The weight guide is low as these are the minimum weight recommended.
The T-Rice Pro is a twin board designed to give you the highest performance across all mountain and freestyle. The C2 profile has the perfect balance between rocket and camber, the rocker in-between the feet gives you float in the powder and improved edge hold. Whilst the camber either side increases the pop for the park and stability at high speeds.
If speed on the mountain is your thing, then the T-Rice Pro could be your next ride. The sintered base is hardwearing and helps you fly over flats and smash through the slush. To give you extra confidence when riding fast, the T-Rice Pro uses Magne-traction edges which have a serrated finish giving you improved edge hold and control. The T-Rice Pro is best suited to intermediate to advanced riders as it’s highly responsive thanks to the Tri-Ax fiberglass. If you have mastered the slopes and want to hit the park, the slim tip and tail reduce the spin weight, making rotations easier in the air and on the snow.
Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.
All Mountain Freestyle
Energy Efficient Non Toxic Reduced Waste
Product Sizing Chart
Subscribe to Surfdome